IBM 6400 Series User Manual page 12

Chapter 1
Printer Setup
6. If you have the internal PCI Ethernet Interface, press + until Ethernet
displays. If you have the external Ethernet Interface, press + until Adapter
displays.
7. Press
8. Press ↓ and
9. Press PAUSE twice to put the printer back online.
Factory Menu
1. On the operator panel, press the PAUSE key to take the printer offline.
2. Press ↓ and
3. Press +, –, ↓, and ↑ at the same time to enter the Factory menu.
4. Press ↓ until PNE Port (or Diagnostic Port) displays.
5. If you have the internal PCI Ethernet Interface, press + until Ethernet (or
Debug Ethernet) displays. If you have the external Ethernet Interface,
press + until Adapter (or Debug Adapter) displays.
6. Press
7. Press ↓ and
8. Press PAUSE twice to put the printer back online.
6700-M40 Series Thermal Printers
1. Press
2. Press the Down and
3. Press the Right key until
4. Press
5. Press the Up key until Admin User displays.
6. Press the Right key until Enable displays.
7. Press
8. Press
9. Press the Down key until
10. Press
11. Press the Down key until Printer Mgmt displays.
12. Press
13. Press the Down key until PNE Port displays.
14. Press the Right key until Ethernet displays.
15. Press
16. Press the Down and
17. Press
12
↵
to select it.
↵
at the same time to lock the
↵
at the same time to unlock the
↵
to select it.
↵
at the same time to lock the
to enter Menu mode.
↵
keys at the same time to unlock the
PRINTER SETUP displays.
↵
to enter the PRINTER SETUP menu.
↵
to select it. An asterisk (*) displays after Enable.
to enter Menu mode.
INTERFACES displays.
↵
to enter the INTERFACES menu.
↵
to enter the Printer Mgmt menu.
↵
to select it. An asterisk (*) displays after Ethernet.
↵
keys at the same time to lock the
twice to put the printer back online.
↵
key.
↵
key.
↵
key.
↵
MEDIA SETUP displays.
↵
key.
key.