Safety Decals And Locations; Emission Control System; Safety Rules - Ariens Classic LM 21 Manual

SAFETY DECALS AND
LOCATIONS
ALWAYS replace missing or damaged safety
decals. Refer to Figure 2 for safety decal
locations.
3
2
OM3181
1. DANGER!
TO AVOID SERIOUS INJURY OR DEATH
Read the operator's manual.
OL1801
Keep children and others away
from unit while operating.
OL4370
Never direct discharge toward
other people. Thrown objects can
cause injury.
OL0910
Do not operate mower unless
guards are in operating position
or entire bagger is attached.
OL4540
Keep safety devices (guards,
shields, switches, etc.) in place
and working.
OL3030
1
Figure 2
• Go across slopes, not up and down.
• Look down and behind before and
while moving backward.
• Do not park on a slope unless
chocked or blocked.
• Do not allow operation of machine by
untrained personnel.
2. DANGER!
KEEP HANDS AND FEET AWAY
Do not operate mower unless guards are in
operating position or bagger is attached.
3. CAUTION!
• Bag is subject to wear and
deterioration.
• Check bag frequently, replace when
necessary.
• Use original bag to comply with safety
specifications.

EMISSION CONTROL SYSTEM

This equipment and/or its engine may include
exhaust and evaporative emissions control
system components required to meet U.S.
Environmental Protection Agency (EPA)
and/or California Air Resources Board
(CARB) regulations. Tampering with
emission controls and components by
unauthorized personnel may result in severe
fines or penalties. Emission controls and
components can only be adjusted by an
Ariens Company dealer or an authorized
engine manufacturer's service center.
Contact your Ariens Company Equipment
Retailer concerning emission controls and
component questions.

SAFETY RULES

If unit is to be used by someone other than
original purchaser; loaned, rented or sold,
ALWAYS provide this manual and any
needed safety training before operation.
Learn applicable rules and laws in your area,
including those that may restrict the age of
the operator.
Read, understand and follow all safety
practices in Owner/Operator Manual before
beginning assembly. Failure to follow
instructions could result in personal injury
and/or damage to unit.
If the operator or the mechanic cannot read
the manual, it is the owner's responsibility to
explain it to them. Only the user can prevent
and is responsible for accidents or injuries
occurring to themselves, other people or
property.
GB - 5