Capturing And Playing Back Still Images; Shooting Single Shots - Sanyo VPC-X1250 Instruction Manual

CAPTURING AND PLAYING BACK STILL IMAGES

There are two modes for capturing still images. In the single-shot mode, one
image is captured each time the shutter button is pressed. In the sequential
shots mode, when you press the shutter button, several successive images
are captured. For more information about taking sequential shots, please see
page 28.

Shooting single shots

1
Set the camera to the single-
shot mode (page 22).
2
Rest your finger on the
shutter button.
h Engage the autofocus by
pressing the shutter button
halfway (focus lock).
3
Gently press the shutter
button.
h Press the shutter button
gently, taking care not to
move the camera.
h The image that was
captured appears on the
monitor as long as the
shutter button is kept
pressed (post view).
Shutter button
F5.2 F5.2 F5.2
1/102 1/102 1/102
Single-shot icon
<Single-Shot Screen>
26
English