How To Use - Panasonic CS-E7PKR Operating Instructions Manual

How to use

ECONAVI
To optimise energy saving
To select operation mode
MODE
AUTO - For your convenience
HEAT - To enjoy warm air
COOL - To enjoy cool air
DRY - To dehumidify the environment
FAN - To circulate air in the room
To improve humidity and
MILD DRY
moisture level
• This operation reduces air dryness and provides
you with a comfortable living environment
during COOL mode only.
• When vertical airfl ow direction is set to AUTO, it
stops at lower position to avoid cold air contact.
However, you can adjust the louver direction
manually.
To switch between
POWERFUL/QUIET
powerful & quiet
POWERFUL QUIET
POWERFUL: To reach temperature quickly
POWERFUL
• This operation stops automatically after 4 hours.
QUIET: To enjoy quiet operation
QUIET
• This operation reduces airfl ow noise.
Auto OFF/ON button
6
NORMAL
Use when remote control is misplaced or a malfunction occurs. Raise the front panel:
• To use in AUTO mode, press the button once.
• To use in COOL mode, press and hold the button until 1 beep is heard, then
release.
• To use in HEAT mode, press and hold the button until 1 beep is heard, then
release. And press again until 2 beeps are heard, then release.
• Press the button again to turn off.
Human activity
sensor and indicator
Sunlight sensor
and remote control
receiver
Remote control
display
AIR CONDITIONER
MILD
MODE
DRY
To select fan speed
FAN SPEED
(Remote control display)
• For AUTO, the indoor fan speed is
automatically adjusted according to the
operation mode.
Indicator
(Green)
(Green)
POWER
(Orange)
TIMER
(Green)
AUTO COMFORT
(Blue)
NANOE-G
(Orange)
POWERFUL
(Green)
QUIET
Press and hold for
approximately
10 seconds to show
temperature setting in
°C or °F.
Press to restore the
remote control to
default setting.
Not used in normal
operations.