Table of Contents
Advertisement
This connector connects to a LAN card with a WAKE ON-LAN output.
connector power up the system when a wake up signal is received through the LAN
card.
NOTE: This feature requires that Wake On LAN or Ring In Wake up is enabled.
(10) FAN Speed Headers (3-pin) : SYSFAN, CPUFAN
These connectors support cooling fans of 350mA (4.2 Watts) or less, depending on the fan
manufacturer, the wire and plug may be different. The red wire should be positive, while
the black should be ground. Connect the fan's plug to the board taking into consideration
the polarity of connector.
(11) IR infrared module Headers (5-pin) : IR
This connector supports the optional wireless transmitting and receiving infrared module. You
must configure the setting through the BIOS setup to use the IR function.
WOL
1
3
Wake-On-LAN Headers
CPUFAN
1
3
SYSFAN
1
3
FAN Headers
IR
2
6
Pin 1
5
IR infrared module Headers
16
This
Advertisement
Table of Contents
