JETWAY S755MAX User Manual page 15

(3) USB Port connector: USB1, USB2
The connectors are 4-pin connector that connect USB devices to the system board.
(4) LAN Port connector: LAN
This connector is standard RJ45 connector for Network connector.
(5) PS/2 Mouse & PS/2 Keyboard Connector: KBMS (PS2 KB/MOUSE)
The connectors for PS/2 keyboard and PS/2 Mouse.
(6) Parallel Port Connector (25-pin female): PRINT
Parallel Port connector is a 25-pin D-Subminiature Receptacle connector.
Parallel Port can be disabled through the BIOS SETUP.
"INTEGRATED PERIPHERALS SETUP" section for more detail information.
(7) Audio Line-In, Lin-Out, MIC Connector : CN1
This Connector are 3 phone Jack for LINE-OUT, LINE-IN, MIC
Line-out :
Line-in :
MIC :
(8) Serial Port COM1: COM1
COM1 is the 9-pin D-Subminiature mail connector. The On-board serial port can be disabled
through BIOS SETUP. Please refer to Chapter 3 "INTEGRATED PERIPHERALS SETUP"
section for more detail information.
(9) Floppy drive Connector (34-pin block): FDC
This connector supports the provided floppy drive ribbon cable. After connecting the single plug
end to motherboard, connect the two plugs at other end to the floppy drives.
Pin 1
Audio output to speaker
Audio input to sound chip
Microphone Connector
PS/2 Mouse PRINT
PS/2 Keyboard COM1
FDC
Floppy Drive Connector
USB1 LAN
UL_B
COM2
Pin 1
12
The On-board
Please refer to Chapter 3
MIC
LINE-IN
LINE-OUT