Headers - JETWAY V6FP User Manual

2-6-2 Headers

(1) Line-In/Out, MIC Header (9-pin): AUDIO
This header connect to Front Panel Line-In, Line-out, MIC connector with cable.
(2) Serial Port2 COM2 Headers (9-pin) : COM2
(3) USB Port Headers (9-pin) : USB1, USB2
These headers are used for connecting the additional USB port plug. By attaching an
option USB cable, your can be provided with two additional USB plugs affixed to the
back panel.
(4) IDE Activity LED: IDE LED
This connector connects to the hard disk activity indicator light on the case.
(5) Turbo LED switch: TB LED
Since the motherboard's turbo function is always on. The turbo LED will remain
constantly on while the system power is on. You may wish to connect the Power LED
from the system case to this lead. See the figure below.
AUDIO
Pin 1
2
AUD _ MIC
AUD _ MIC _ BIAS
AUD _ R ET _ R
AUD _ FPO UT _ R
HP _ O N
AUD _ RET _ L
AUD _ FPO UT _ L
9 10
Line-In/Out, MIC Headers
Note: Orient the read marking on the
COM2 ribbon cable to pin 1
CO M2
Pin 1
Serial Port2 COM2 Header
USB1
USB2
Pin 1
Pin 1
USB Port Headers
14
AUD _ G ND
AUD _ VCC