Tap Mode; Numeric Mode; Symbol Mode - Motorola W375 User Manual

CFJN3329B.book Page 44 Thursday, November 9, 2006 3:41 PM

tap mode

Press # in a text entry screen to switch to
TAP mode. If you do not see g or m, press
M > Entry Setup to set TAP mode as your
Primary or Secondary text entry mode.
To enter text in TAP mode, press a keypad
key repeatedly to cycle through the letters
and number on the key. Repeat this step to
enter each letter.
For example, if you press 8 one time, your
phone displays:
Character
ã?
displays at
h xå
4
Message 765
ì
h
insertion
T T
Press DELETE to
point.
erase the
character to
Press OK to
left of insertion
accept &
point.
store text.
OK DELETE
44
basics
After 2 seconds, the character is accepted
and the cursor moves to the next position.

numeric mode

In a text entry screen, press # to switch
entry modes until the 12 (numeric) indicator
is displayed.
Press keypad keys to enter the numbers you
want. When you finish entering numbers,
press # to switch to another entry mode.

symbol mode

In a text entry screen, press # to switch
entry modes until the @ (symbol) indicator is
displayed.
Press keypad keys repeatedly to cycle
through its symbols. Highlight the symbol
you want, then press SELECT.