1. Manuals
  2. Brands
  3. Porter-Cable Manuals
  4. Nail Gun
  5. COIL350
  6. Instruction manual

Porter-Cable COIL350 Instruction Manual

Coil framing nailer
Hide thumbs
Table of Contents

Advertisement

Quick Links

908987 - 12-20-02.qxd
Instruction
manual
To learn more about Porter-Cable
visit our website at:
http://www.porter-cable.com
Copyright © 2002 Porter-Cable Corporation
12/17/02
10:06 AM
Page 1
ESPAÑOL: PÁGINA 15
FRANÇAISE : PAGE 27
COIL FRAMING
NAILER
MODEL COIL350
Please make certain that the person who is
to use this equipment carefully reads and
understands these instructions before
starting operations.
The Model and Serial No. plate is located on the main
housing of the tool. Record these numbers in the
spaces below and retain for future reference.
Model No. ______________________________________
Type ___________________________________________
Serial No. _______________________________________
IMPORTANT
Part No. 908987 - 12-20-02

Advertisement

Table of Contents
loading

Related Manuals for Porter-Cable COIL350

Summary of Contents for Porter-Cable COIL350

  • Page 1 COIL FRAMING manual NAILER MODEL COIL350 IMPORTANT Please make certain that the person who is To learn more about Porter-Cable to use this equipment carefully reads and visit our website at: understands these instructions before http://www.porter-cable.com starting operations. The Model and Serial No. plate is located on the main housing of the tool.
  • Page 2 908987 - 12-20-02.qxd 12/17/02 10:06 AM Page 2 PORTER CABLE Porter-Cable Corporation 4825 Highway 45 North Jackson, TN 38305 ENGLISH EC-DECLARATION OF CONFORMITY We declare under our sole responsibility that this product is in conformity with the regulations EN292-2: section 3 of 1992...

  • Page 3: Safety Guidelines - Definitions

    READ AND FOLLOW ALL INSTRUCTIONS. There are certain applications for which this tool was designed. Porter-Cable strongly recommends that this tool NOT be modified and/or used for any application other than for which it was designed. If you have any questions relative to its application DO NOT use the tool until you have written Porter- Cable and we have advised you.

  • Page 4: General Safety Rules

    908987 - 12-20-02.qxd 12/17/02 10:07 AM Page 4 GENERAL SAFETY RULES 1. Read and understand tool labels and Fig. 1 manual. Failure to follow warnings could result in DEATH or SERIOUS INJURY. Fig. 1. 2. Operator and others in work area MUST Fig.
  • Page 5 Fig. 8. 15. Do not use tool without safety warning label. If label is missing, damaged or unreadable, contact your Porter-Cable Service Center for a replacement. Fig. 9. 16. Only use parts, fasteners and accessories approved by Porter-Cable.

  • Page 6: Technical Specifications

    908987 - 12-20-02.qxd 12/17/02 10:07 AM Page 6 21. Remove finger from trigger when not Fig. 14 driving fasteners. Never carry tool with finger on trigger. In “Contact Actuation Mode” tool will fire a fastener if safety is bumped while trigger is depressed.

  • Page 7: Functional Description

    If an in-line oiler is not available: place five or six drops of Porter-Cable Air Tool Oil into the tool’s air inlet at the beginning of each workday.
  • Page 8 Always connect tool to air supply before loading fasteners (Fig. 18). Do not load fasteners with trigger or safety depressed. Only use approved Porter-Cable fasteners. Operator and others in work area MUST wear safety glasses with side shields. Always wear ANSI Z87.1 approved safety glasses, and ANSI S3.19 approved hearing protection when preparing or operating the...

  • Page 9: Operating Instructions

    908987 - 12-20-02.qxd 12/17/02 10:08 AM Page 9 5. Close magazine nail holder, then Fig. 23 close and latch feeder cover (see Fig. 22). 6. Adjust directional exhaust deflector (A) Fig. 23, so that the exhaust air blast will be directed away from the operator.
  • Page 10 908987 - 12-20-02.qxd 12/17/02 10:08 AM Page 10 Fig. 25 Fig. 24 Keep fingers AWAY from trigger when not driving fasteners to avoid accidental firing. Never carry tool with finger on trigger. In “Contact Actuation Mode” tool will fire a fastener if safety is bumped while trigger is depressed.

  • Page 11: Clearing A Jammed Fastener

    Keep all screws tight. Loose screws can cause personal injury or damage tool. If tool is used without an in-line oiler: place 5 or 6 drops of Porter-Cable Air Tool Oil into the air inlet of the tool at the beginning of each workday.

  • Page 12: Service And Repairs

    All quality tools will eventually require servicing or replacement of parts due to wear from normal use. These operations should ONLY be performed by either an AUTHORIZED PORTER-CABLE SERVICE STATION or a PORTER- CABLE•DELTA FACTORY SERVICE CENTER. All repairs made by these agencies are fully guaranteed against defective material and workmanship.
  • Page 13 10:08 AM Page 13 ACCESSORIES A complete line of accessories is available from your Porter-Cable • Delta Supplier, Porter-Cable • Delta Factory Service Centers, and Porter-Cable Authorized Service Stations. Please visit our Web Site www.porter-cable.com for a catalog or for the name of your nearest supplier.
  • Page 14 PORTER-CABLE LIMITED ONE YEAR WARRANTY Porter-Cable warrants its nailing and stapling tools for a period of one year from the date of original purchase. We will repair or replace at our option, any part or parts of the product and accessories covered under this warranty which, after examination, proves to be defective in workmanship or material during the warranty period.
  • Page 15 Porter-Cable • Delta products should be obtained by contacting any Porter-Cable • Delta Distributor, Authorized Service Center, or Porter-Cable • Delta Factory Service Center. If you do not have access to any of these, call 888-848-5175 and you will be directed to the nearest Porter-Cable •...

Table of Contents