Porter-Cable FN250B Instruction Manual
  1. Manuals
  2. Brands
  3. Porter-Cable Manuals
  4. Nail Gun
  5. FN250B
  6. Instruction manual

Porter-Cable FN250B Instruction Manual

Finish nailer
Hide thumbs Also See for FN250B:

Advertisement

Table of Contents

903908 - 12-31-01.qxd
2/13/02
Instruction
manual
To learn more about Porter-Cable
visit our website at:
http://www.porter-cable.com
Copyright © 2001 Porter-Cable Corporation
2:30 PM
Page 1
ESPAÑOL: PÁGINA 13
FRANÇAISE : PAGE 25
FINISH NAILER
MODEL FN250B
IMPORTANT
Please make certain that the person who is
to use this equipment carefully reads and
understands these instructions before
starting operations.
The Model and Serial No. plate is located on the main
housing of the tool. Record these numbers in the
spaces below and retain for future reference.
Model No. ______________________________________
Type ___________________________________________
Serial No. _______________________________________
Part No. 903908 (0112)

Advertisement

Table of Contents
loading

Related Manuals for Porter-Cable FN250B

Summary of Contents for Porter-Cable FN250B

  • Page 1 Instruction FINISH NAILER manual MODEL FN250B IMPORTANT Please make certain that the person who is To learn more about Porter-Cable to use this equipment carefully reads and visit our website at: understands these instructions before http://www.porter-cable.com starting operations. The Model and Serial No. plate is located on the main housing of the tool.
  • Page 2 903908 - 12-31-01.qxd 2/13/02 2:31 PM Page 2 PORTER CABLE Porter-Cable Corporation 4825 Highway 45 North Jackson, TN 38305 Matthew G. Popik Vice President of Engineering Date of Manufacture:___________________________ Fecha de fabricación:, Date de fabrication: Serial No:______________________________________ Número de serie:, Nombre d'ordre...

  • Page 3: General Safety Rules

    READ AND FOLLOW ALL INSTRUCTIONS. There are certain applications for which this tool was designed. Porter-Cable strongly recommends that this tool NOT be modified and/or used for any application other than for which it was designed. If you have any questions relative to its application DO NOT use the tool until you have written Porter- Cable and we have advised you.
  • Page 4 Fig. 8. 15. Do not use tool without safety warning label. If label is missing, damaged or unreadable, contact your Porter-Cable Service Center for a replacement. Fig. 9. 16. Only use parts, fasteners and accessories approved by Porter-Cable.
  • Page 5 903908 - 12-31-01.qxd 2/13/02 2:31 PM Page 5 Fig. 11 Fig. 12 21. Remove finger from trigger when not Fig. 13 driving fasteners. Never carry tool with finger on trigger: tool will fire a fastener if safety is bumped while trigger is depressed. Fig. 14. 22.

  • Page 6: Technical Specifications

    If an in-line oiler is not available: place five or six drops of Porter-Cable Air Tool Oil into the tool’s air inlet at the beginning of each workday.

  • Page 7: Preparing The Tool

    Always connect tool to air supply before loading fasteners (Fig. 18). • Do not load fasteners with trigger or safety depressed. • Only use approved Porter-Cable fasteners. • Operator and others in work area MUST wear safety glasses with side shields. Always wear ANSI Z87.1 approved safety glasses, and hearing protection when preparing or operating the tool.

  • Page 8: Using Tool With Different Triggering Options

    903908 - 12-31-01.qxd 2/13/02 2:31 PM Page 8 5. Adjust directional exhaust deflector (A) Fig. Fig. 22 22, so that the exhaust air blast will be directed away from the operator. The exhaust deflector provides eight detented positions for directing the exhaust blast away from the operator.

  • Page 9: Clearing Jammed Fastener

    903908 - 12-31-01.qxd 2/13/02 2:31 PM Page 9 WARNING: Disconnect tool from Fig. 23 air supply before performing maintenance, clearing a jammed fastener, leaving work area, moving tool to another location, or handing the tool to another person. WARNING: Clean and inspect tool daily.

  • Page 10: Clean And Inspect Daily

    Keep all screws tight. Loose screws can cause personal injury or damage tool. If tool is used without an in-line oiler: place 5 or 6 drops of Porter-Cable Air Tool Oil into the air inlet of the tool at the beginning of each workday.
  • Page 11 2:31 PM Page 11 ACCESSORIES A complete line of accessories is available from your Porter-Cable • Delta Supplier, Porter-Cable • Delta Factory Service Centers, and Porter-Cable Authorized Service Stations. Please visit our Web Site www.porter-cable.com for a catalog or for the name of your nearest supplier.
  • Page 12 PORTER-CABLE LIMITED ONE YEAR WARRANTY Porter-Cable warrants its nailing and stapling tools for a period of one year from the date of original purchase. We will repair or replace at our option, any part or parts of the product and accessories covered under this warranty which, after examination, proves to be defective in workmanship or material during the warranty period.
  • Page 13 Pour obtenir des pièces et accessoires pour les produits Porter-Cable • Delta, s’adresser à tout distributeur Porter- Cable • Delta, centre de service agréé ou centre de service d’usine Porter-Cable • Delta. Si vous n’avez accès à aucun de ces centres, appeler le 888-848-5175 et on vous dirigera vers le centre de service d’usine Porter-Cable •...

Table of Contents