Operate The Camera - Panasonic DMC-TS5 Connection Manual

Operation on the camera
1 2
Turn on the Select [New
Wi-Fi function. Connection].


 Press camera [ON/OFF]
button.
 Press [Wi-Fi]. You can select the setting
you used before from [History
Connection].
Make sure the Wi-Fi connection
Please refer to "Owner's
lamp  is lit blue.
Manual for advanced
 Lit blue:
features" (PDF) for details.
The Wi-Fi connection is on standby
 Blinking blue:
Sending/receiving data through the
Wi-Fi connection
Preparing folders for receiving images
Prepare folders for receiving images on the PC before sending a
picture to the PC.
Create a PC user account [account name (up to 254 characters)

and password (up to 32 characters)] consisting of alphanumeric
characters. An attempt to create a receive folder may fail if the
account includes non-alphanumeric characters.

When using "PHOTOfunSTUDIO"
1
Install "PHOTOfunSTUDIO" to the PC.
 For details on hardware requirements and installation,
"Owner's Manual for advanced features" (PDF) .
2 Create a folder that receives images with "PHOTOfunSTUDIO".
 To create the folder automatically, select [Auto-create]. To
specify a folder, create a new folder, or set a password to the
folder, select [Create manually].
For details, refer to the operating instructions of

"PHOTOfunSTUDIO" (PDF).
 When not using "PHOTOfunSTUDIO"
(For Windows)
Supported OS: Windows XP/Windows Vista/Windows 7/Windows 8
Example: Windows 7
1
Select a folder you intend to use for receiving, then right-click.
2
Select [Properties], then enable sharing of the folder.
 For details, refer to the operating instructions of your PC or Help
on the operating system.
(For Mac)
Supported OS: OS X v10.4 to v10.8
Example: OS X v10.8
1
Select a folder you intend to use for receiving, then click on the
items in the following order.
[File] → [Get Info]
2 Enable sharing of the folder.
 For details, refer to the operating instructions of your PC or Help
on the operating system.
If the workgroup of the destination PC has been changed from

the standard setting, you also need to change the setting of this
unit in [PC Connection].
Connecting the camera to a TV or PC etc. via a wireless access point
3
Select the desired option.
Playback on TV
You can display recorded pictures on
a DLNA-compatible TV.
 For details, refer to the operating
instructions of your TV.
Send Images While Recording
refer to
Every time you take a picture, the
picture can be automatically sent to a
smartphone/tablet or PC.
 Prepare folders for receiving images
on the PC before sending a picture
to the PC.
Send Images Stored in the
Camera
You can select and send recorded
images to a smartphone/tablet or PC.
 Prepare folders for receiving images
on the PC before sending a picture
to the PC.
Example: Connecting to the TV
Select [Playback on TV].
Example: Sending to the PC
Select [Send Images Select [PC].
While Recording].
Example: Sending to the PC
Select [Send Images Select [PC].
Stored in the Camera].
 One of the connection methods is shown as an example.
Please refer to "Owner's Manual for advanced features"
(PDF) for details.
4 5
Select the connection

Operate the camera

method. (according to the intended
purpose).
Connecting via a wireless
access point
Select [Via Network].
 Example: Connecting with [WPS
(Push-Button)].
Select [WPS (Push-Button)].
Example:
Press and hold the
wireless access point
WPS button until it
switches to WPS Mode.
 You can also connect your device
to the camera directly without using
a wireless access point.
Please refer to "Owner's Manual
for advanced features" (PDF) for
details.
Select the device you want to
connect to.
When the connection is established,
the screen is displayed.
Take or play back pictures on the
camera.
Motion pictures cannot be displayed

on the TV.
Select the PC you want to connect
to and the destination folder.
Take pictures on the camera.
The pictures are sent automatically
after taking them.
 Folders sorted by the sent date are created in the
specifi ed folder, and pictures are saved in those
folders.
 If the screen for a user account and password
entry appears, enter the one you set on your PC.
Select the PC you want to connect
to and the destination folder.
Select [SINGLE] or [MULTI], and
then select and send images.