Power Modem - Belkin AC1200 DB User Manual

GettinG to Know Your router

Power Modem

Upper Panel
A
FPo
A) Power Modem Status Light
Power Modem's status is shown by the light on the front.
off: The Power Modem is not plugged into a power socket.
Blinking Blue: The Power Modem is starting up and
attempting to synch.
Solid Blue: The Power Modem is connected
and communicating with the ISP.
Blinking Amber: The Power Modem is not
connected to an active DSL phone line.
Lower Panel
FPo
A
C
A) reset Button
This button is used to restart your Power Modem in rare cases when
it functions incorrectly. Resetting the Power Modem will preserve your
settings. This button may also be used to restore the factory default
settings. Please see the Troubleshooting section for more information.
B) Bundled Cable Port (fixed)
A bundled cable (power cord + Ethernet cable) from this port
for connecting to router's modem port and power jack.
C) DSL Phone Cable Port
Connect the included phone cord to ADSL line in your
house. Replace with a longer phone cord as needed.
32
B