Table of Contents
Advertisement
MIRACAST VIDEO ADAPTER'S INTERFACES
Advanced Web Interface
The web interface can be accessed from a device that has
Wi-Fi. The web interface is only available when the Adapter
is in Advanced Settings Mode. You will know whether your
Adapter is in Advanced Settings Mode if the TV screen reads
"Firmware Update." To enter Advanced Settings Mode on
the Miracast Video Adapter, please follow these steps:
1. Power the Miracast Video Adapter off by unplugging the attached
USB cable or turn the TV off if the Adapter is powered by the TV.
2. Press and hold the Multipurpose button located
on the side of the Miracast Video Adapter.
3. While still holding the Multipurpose button, plug the USB cable back
in and continue to hold it until the Firmware Update page appears.
22
Advertisement
Table of Contents
