Creative Sound Blaster Audigy 2 Platinum User Manual page 75

❑ The powered speakers or external amplifier are connected to the card's Line Out
or Rear Out jack.
❑ There is no hardware conflict between the card and a peripheral device. See
"Resolving I/O Conflicts" on page B-11.
❑ The Speaker selection in Creative Speaker Settings corresponds to your speaker
or headphone configuration.
No audio output when playing audio CDs or DOS games that require a CD-
ROM.
To solve this problem:
❑ Make sure the Analog Audio connector on the CD-ROM drive and the CD In
connector on the audio card are connected.
❑ Enable digital CD playback:
For Windows 98 SE
i. Click Start -> Settings -> Control Panel.
ii. In the Control Panel dialog box, double-click the Multimedia icon.
iii. In the Multimedia Properties dialog box, click the CD Music tab.
iv. Click the Enable digital CD audio for this CD-ROM device check box to select it.
v. Click the OK button.
For Windows Me
i. Click Start -> Settings -> Control Panel.
ii. In the Control Panel dialog box, double-click the System icon.
iii. In the System Properties dialog box, click the Device Manager tab.
iv. Double-click the DVD/CD-ROM drives icon.
Your computer drives will appear.
v. Right-click the disk drive icon. A menu will appear.
vi. Click Properties.
vii.In the Digital CD Playback box of the next dialog box, click the Enable digital CD
audio for this CD-ROM device check box to select it.
Troubleshooting and FAQs B-4