Creative Sound Blaster Audigy 2 Platinum User Manual page 36

• If the Sound Blaster
Audigy 2 card is connected
to both the CD_SPDIF and
CD Audio connectors on a
CD-ROM or DVD-ROM
drive, do not enable the
CD Audio and CD Digital
options at the same time
in Surround Mixer.
• Analog and Digital CD
audio cables are not
needed when CDDA is
used.
• The CD_SPDIF connector
is not used with software
DVD players.
For analog CD audio output:
connect an Analog CD audio cable (available separately) from the Analog Audio
connector on your CD-ROM/DVD-ROM drive to the CD_IN connector on the Sound
Blaster Audigy 2 card as shown in Figure 1-14.
Figure 1-14:Connecting analog/digital audio cables to CD-ROM/DVD-ROM drives.
For digital CD audio output:
connect the Digital CD audio cable from the Digital Audio connector on your CD-
ROM/DVD-ROM drive to the CD_SPDIF connector on the Sound Blaster Audigy 2
card as shown in Figure 1-14.
A
OR
B
C
A: CD-ROM/DVD-ROM
drive
B: Analog CD Audio
cable (available
separately)
C: Digital CD Audio
cable
Installing Hardware 1-21