2
Slide the Power switch towards the Power
end of a paper clip into the Reset hole.
The Recovery Mode screen appears when Zen turns on.
WARNING!
Take care to insert the paper clip into the Reset hole and NOT the Microphone.
3
Four menu items are available in the Recovery Mode screen: CleanUp, Format All,
Reload Firmware and Reboot.
4
To clean up your player's hard disk drive, select Cleanup.
5
When the clean up is complete, select Reboot. Your player restarts and starts rebuilding
Music Library.
CAUTION!
Selecting Format All clears Zen's hard disk and erases all hard disk content. Back
■
up your player's content before formatting your player.
Selecting Reload Firmware erases your player's firmware. DO NOT Select the
■
Reload Firmware unless you have downloaded a newer firmware version for Zen,
or have been advised to do so by the Creative Customer Services center.
icon and hold it there while inserting one
Frequently Asked Questions
60