Canon PowerShot S60 User Manual page 128

4
Turn on the TV and switch it to Video
mode.
5
Power the camera into Shooting
mode or Playback mode (p. 21).
The image will appear on the TV. Shoot or play
back images as usual.
No image will appear on the LCD monitor when
the camera is connected to a TV monitor.
The video output signal can be switched
(NTSC or PAL) to accommodate different
regional standards. The default setting will vary
between regions.
NTSC: Japan, U.S.A., Canada, Taiwan, etc.
PAL: Europe, Asia (excluding Taiwan),
Oceania, etc.
If an incorrect video system is set, the output
image will not display properly.
If the TV is a stereo model, you can plug the
audio plug into either the left or right Audio In
jack. Please refer to the TV's manual for details.
A TV set cannot be used in the
Assist) mode.
126 9. Additional Features
(Stitch