Canon PowerShot S60 User Manual page 121

Macintosh
PowerShot S70
OS Mac OS X (v10.1.5 ~ v10.3)
Computer The above OS should be preinstalled on computers
Model with built-in USB ports.
CPU PowerPC G3/G4/G5
RAM 256 MB or more
Interface USB
Canon Utilities
Free Hard
ImageBrowser:
Disk Space
PhotoStitch:
Display 1,024 x 768 pixels/32,000 colors or better is required
PowerShot S60
OS Mac OS 9.0 - 9.2, Mac OS X (v10.1/v10.2/v10.3)
Computer The above OS should be preinstalled on computers
Model with built-in USB ports.
CPU PowerPC
Mac OS 9.0 - 9.2: 64 MB or more of application
RAM memory
Mac OS X (v10.1/v10.2/v10.3): 128 MB or more
Interface USB
Canon Utilities
Free Hard
ImageBrowser:
Disk Space
PhotoStitch:
800 x 600 pixels/32,000 colors or better is required
Display
1,024 x 768 pixels or better is recommended
You must install the software and driver bundled on
the supplied Canon Digital Camera Solution Disk
onto your computer before connecting the camera
to a computer.
200 MB or more
40 MB or more
120 MB or more
30 MB or more
The camera will not operate correctly if you
connect it to your computer before installing the
driver and software. If this happens, please
refer to the Troubleshooting section of the
Canon Digital Camera Software Starter Guide
Disk.
You do not need to turn off the camera or
computer power when making a USB
connection.
Please refer to your computer's manual for
information regarding the location of the
USB port.
You are recommended to use fully charged
battery pack or AC Adapter Kit ACK700 (sold
separately) to power the camera when
connecting to a computer (p. 14, p. 148).
All procedures performed with a connection to
a USB 2.0 compliant board are not
guaranteed.
9. Additional Features 119