GE 197D3354P013 Owner's Manual And Installation Instructions page 16

General electric top-freezer refrigerators owner's manual and installation instructions
Table of Contents

Advertisement

Available languages

Available languages

REVERSING THE DOOR SWING
TRANSFER CENTER HINGE
5
BRACKET TO THE LEFT
Remove the center hinge bracket by removing the
three Torx
®
screws.
NOTE: Keep these screws with the hinge bracket.
They are long screws and will be used when installing
the hinge on the other side.
On some models, you will need to remove the color-
matched caps from the screw heads before you can
remove the screws. Use the edge of a thin flat blade to
gently pry the caps off the screw heads. (A putty knife
works well for this.) Cover the blade with tape to
prevent scratching the paint.
Remove the three Torx
side of the cabinet. Screw them into the holes on
the right side.
Place the center hinge bracket over the holes at
the center left side of the cabinet. Insert and
tighten the three long screws.
Replace the caps by snapping them over the screws
with your finger.
TRANSFER DOOR STOPS
6
On each door, move the metal door stop from the
right to the left.
Move any screws from the left to the right.
Door Stop
Left Side
Installation Instructions
®
screws from the center left
Screw Cap
Door Stop
Right Side
(CONT.)
TRANSFER REFRIGERATOR
7
DOOR HANDLE TO THE RIGHT
Plastic handle:
Remove the plug
button by carefully
prying under the edge
with a putty knife.
Remove the
exposed screw holding
the handle.
Remove
the two screws holding
the handle to the top
of the door.
Stainless steel handle (on some models):
Remove the two
screws holding the
handle to the top of
the door. Loosen the
set screw with the
3/32" Allen wrench
(supplied) and remove
the handle.
Remove
the handle fastener
with the 3/16" Allen
wrench (supplied).
Transfer the fastener
to the right side and
move the plug button
to the left side of the
refrigerator door.
After removing the
handle: Move the small
plug buttons from the top
right side of the door top
and insert them into the
holes on the opposite side.
Move the large plug
button from the left
edge of the door and
insert it into the hole
on the opposite side.
16
3
1
2
Handle
Handle
Plug
Plug
1
3
Fastener
Plug
2
Button
Small Plug
Buttons
Plug Button

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wx08x10006Wx08x10015Wx08x10025

Table of Contents