NETGEAR DG834Gv5 User Manual page 90

Wireless ADSL2+ Modem Router DG834Gv5 User Manual
e. Select IP Address in the ID Type drop-down list.
f. Enter the public WAN IP Address of the DG834G v5 in the field directly below the ID
Type drop-down list. In this example, 22.23.24.25 is used.
The resulting connection settings are shown in
3. Configure the security policy in the NETGEAR ProSafe VPN Client software:
a. In the Network Security Policy list, expand the new connection by double-clicking its
name or clicking the + symbol. My Identity and Security Policy subheadings appear below
the connection name.
b. Click the Security Policy subheading to view the Security Policy settings.
Figure 6-10
c. In the Select Phase 1 Negotiation Mode section of the screen, select the Main Mode radio
button.
4. Configure the VPN client identity.
In this step, you provide information about the remote VPN client PC. You must provide the
pre-shared key that you configured in the DG834G v5 and either a fixed IP address or a fixed
virtual IP address of the VPN client PC.
6-12
Figure
v1.0, March 2010
6-10.
Virtual Private Networking