NETGEAR DG834Gv5 User Manual page 27

Figure 2-2
The settings for this screen are explained in
3. Select the region in which the modem router will operate.
4. For initial configuration and test, leave the other settings unchanged.
5. To save your changes, click Apply.
6. Configure and test your computers for wireless connectivity. After testing your wireless
connectivity, select a security method (see
Set up your wireless computers with the same SSID and wireless security settings as your
modem router. Check that they have a wireless link and are able to obtain an IP address by
DHCP from the modem router. If there is interference, adjust the channel.
Configuring Your Wireless Network and Security Settings
Wireless ADSL2+ Modem Router DG834Gv5 User Manual
Table 2-1 on page
"Configuring Your Wireless Security" on page
v1.0, March 2010
2-6.
2-7).
2-5