Leveling The Range - GE XL44 JGBP79 Owner's Manual

Leveling the Range

Install the oven shelves in the oven and
position the range where it will be installed.
Check for levelness by placing a spirit level or
a cup, partially filled with water, on one of the
oven shelves. If using a spirit level, take two
readings—with the level placed diagonally
first in one direction and then the other.
Remove the storage drawer or warming
drawer. See the Care and cleaning of the range
section. The front leveling legs can be adjusted
from the bottom and the rear legs can be
adjusted from the top or the bottom.
Using an open-end or adjustable wrench,
adjust the leveling legs until the range is level.
After the range is level, slide the range away
from the wall so that the Anti-Tip device
can be installed.
Raise
range
Lower
range
(on some models)
Lower
range
Leg
leveler
Raise
range
(on some models)
45