Iii-3. Wps (Wi-Fi Protected Setup) - Edimax IC-7001W User Manual

III-3. WPS (Wi-Fi Protected Setup)
The WPS button is a quick and easy method to establish a secure wireless
connection between your network camera and your wireless router/access
point.
1.
Press and hold the WPS button on your wireless router/access point for
the correct length of time to activate its WPS.
Please check the instructions for your
wireless router/access point for how long
you need to hold down its WPS button to
activate WPS.
2.
Within two minutes, press the WPS/Reset button on the network camera
for 2 – 5 seconds to activate WPS. The orange LED will flash slowly to
indicate that WPS is active.
Take care not to hold the WPS button
too long and reset your network
camera (see I-5.)
3.
The devices will establish a connection. The green LED will display on or
flashing to indicate a successful connection.
17