Hitachi ic35l060avv207-0 - Deskstar 60 GB Hard Drive Specifications page 194

After a successful command completion, Identify Device response words (61:60) shall reflect the maxi-
mum address set with this command.
If the 48-bit Address feature set is supported, the value placed in Identify Device response words
(103:100) shall be the same as the value placed in words (61:60). However, if the device contains greater
than 268,435,455 sectors, the capacity addressable with 28-bit commands, and the address requested is
268,435,455, the max address shall be changed to the native maximum address, the value placed in
words (61:60) shall be 268,435,455 and the value placed in words (103:100) shall be the native maximum
address.
If a host protected area has been established by a Set Max Address Ext command, the device shall
return command aborted.
Output parameters to the device
B
Sector Number
Cylinder High/Low
H
Input parameters from the device
Sector Number
Cylinder High/Low
H
Option bit for selection whether nonvolatile or volatile. B = 0 is volatile condition.
When B=1, MAX LBA/CYL which is set by Set Max LBA/CYL command is pre-
served by POR. When B=0, MAX LBA/CYL which is set by Set Max LBA/CYL
command will be lost by POR. B = 1 is not valid when the device is in Address
Offset mode.
In LBA mode this register contains LBA bits 0 - 7 which is to be set. (L=1)
In CHS mode this register is ignored. (L=0)
In LBA mode this register contains LBA bits 8 - 15 (Low), 16 - 23 (High) which is
to be set. (L=1)
In CHS mode this register contains cylinder number which is to be set. (L=0)
In LBA mode this register contains LBA bits 24 - 27 which is to be set. (L=1)
In CHS mode this register is ignored. (L=0)
In LBA mode this register contains max LBA bits 0 - 7 which is set. (L=1)
In CHS mode this register contains max sector number. (L=0)
In LBA mode this register contains max LBA bits 8 - 15 (Low), 16 - 23 (High)
which is set. (L=1)
In CHS mode this register contains max cylinder number which is set. (L=0)
In LBA mode this register contains max LBA bits 24 - 27 which is set. (L=1)
In CHS mode this register contains max head number. (L=0)
Deskstar 180GXP hard disk drive specifications
180