Part Identification Chart - Weslo Purcuit4.2 Bike Manual

PART IDENTIFICATION CHART

Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembled. Extra parts may be included.
M4 Washer M6 Washer
(23)––2
(32)––8
M6 Locknut
(51)––4
M4 x 16mm
Self-tapping
Screw (47)––4
M10 x 65mm Screw (33)––2
M6 Curved
Washer (25)––4
M8 Locknut M10 Locknut
(10)––4
M6 x 30mm Bolt
(49)––4
M8 x 65mm Bolt (36)––2
M8 x 125mm Bolt (29)––2
M8 Split M8 Washer
Washer (42)––3 (54)––4
M4 x 5mm
Self-tapping
(48)––2
Screw (40)––2
M6 x 35mm Screw
(61)––8
M10 x 75mm Carriage Bolt (30)––2
5
M8 Curved
Washer (46)––2
M4 x 10mm
Self-tapping
Screw (63)––2
M8 x 20mm
Screw (34)––3