Self-Cleaning - GE JSP39SNSS Owner's Manual

Using the self-cleaning oven.
Self
Clean
Start
Time
Start
On
(on some models)
How to Delay the Start of Cleaning
Make sure the clock shows the correct time
of day.
Latch the door.
Touch the Self Clean pad.
Using the + or – pads, enter
the desired clean time.
Touch the Start Time pad.
The earliest start time you can set
will appear in the display.
Using the + or – pads, enter the time
of day you want the clean cycle to
start.
Touch the Start/On pad.
To Stop a Clean Cycle
Touch the Clear/Off pad.
Wait until the oven has cooled below the
locking temperature to unlatch the door.
You will not be able to open the door right
away unless the oven has cooled below
the locking temperature.
After a Clean Cycle
You may notice some white ash in the
oven. Wipe it up with a damp cloth after
the oven cools.
If white spots remain, remove them with
a soap-filled steel wool pad and rinse
thoroughly with a vinegar and water
mixture.
These deposits are usually a salt residue
that cannot be removed by the clean
cycle.
If the oven is not clean after one clean
cycle, repeat the cycle.
GEAppliances.com
(on some models)
The display will show the start time. It will
not be possible to unlatch the oven door
until the temperature drops below the lock
temperature.
The oven shuts off automatically when the
clean cycle is complete, and 0:00 will flash
in the display.
■
You cannot set the oven for cooking until
the oven is cool enough for the door to
be unlatched.
■
While the oven is self-cleaning, you
can press the Clock pad to display the
time of day. To return to the clean
countdown, press the Self Clean pad.
■
Apply a small amount of vegetable oil
to a paper towel and wipe the edges of
the oven racks with the paper towel. Do
not spray with Pam ® or other lubricant
sprays.
23