Materials You May Need - GE JGBS24 Owner's Manual & Installation Instructions

FOR YOUR SAFETY
Do not store or use combustible materials,
gasoline or other flammable vapors and
liquids in the vicinity of this or any other
appliance. If you smell gas:
1
Open windows.
2
Don't touch electrical switches.
3
Extinguish any open flame.
4
Immediately call your gas supplier.
TOOLS YOU WILL NEED
Phillips screwdriver
Flat-blade screwdriver
3/16" or smaller
Pencil and ruler
Level
PART INCLUDED
Anti-tip bracket kit
Installation Instructions
Open-end or
adjustable wrench
Pipe wrenches (2)
(one for backup)
Drill, awl or nail
24

MATERIALS YOU MAY NEED

• Gas line shut-off valve
• Pipe joint sealant or UL-approved pipe
thread tape with Teflon* that resists action
of natural and LP gases
• Flexible metal appliance connector (1/2"
I.D.). A 5-foot length is recommended for
ease of installation but other lengths are
acceptable. Never use an old connector
when installing a new range.
• Flare union adapter for connection to gas
supply line (3/4" or 1/2" NPT x 1/2" I.D.)
• Flare union adapter for connection to
pressure regulator on range (1/2" NPT x
1/2" I.D.)
• Liquid leak detector or soapy water
• Lag bolt or 1/2" O.D. sleeve anchor
(for concrete floors only)
• Long matches and/or match holder
(for models equipped with standing pilots)
*Teflon: Registered trademark of DuPont