Weider Club 4870 User Manual page 14

19. Apply grease to a 2 3/4" Bushing (65) and insert
the Bushing into the Left Base (2). Attach the
Press Frame to the Left Base (2) with an M10 x
90mm Bolt (102) and an M10 Nylon Locknut (84).
20. Attach the Right Press Arm (26) to the Press
Frame (13) with two M10 x 70mm Bolts (57) and
two M10 Nylon Locknuts (84).
Attach the Left Press Arm (25) to the Press
Frame (13) in the same manner.
21. Apply grease to an M10 x 70mm Bolt (57). Attach
a Press Arm Handle (27) to the Right Press Arm
(26) with the Bolt and an M10 Nylon Locknut (84).
Do not overtighten the Nylon Locknut; the
Press Arm Handle must be able to pivot easily.
Repeat this step with the other Press Arm
Handle (27) and the Left Press Arm (25).
22. Apply grease to a 2 3/4" Bushing (65) and insert
the Bushing into the Press Leg (21). Next, orient
the Leg Press with the welded spacer on the indi-
cated side and attach the Leg Press to the Left
Base (2) with an M10 x 95mm Bolt (107) and an
M10 Nylon Locknut (84).
19
102
65
20
26
21
57
84
22
14
13
84
2
Grease
25
57
27
Grease
25
27
26
12
Welded
Spacer
2
107
65
Grease
84
84
13