Vcc-Xzn600P - Sanyo VCC-XZN600P Installation Manual

■ Connection when Not Using PoE Power Supply
● Internet connection
Connect the camera to a router or ADSL modem with LAN interface using shielded LAN cables.
When connecting to a router, use the straight type LAN cable (CAT5 or higher).
When connecting to an ADSL modem or other devices, refer to the instruction manual for the device.
● About the internet connection
Port forwarding must be set on two of the router ports (camera side).
For details on how to set port forwarding, please refer to your router's instruction manual.
• Video port number
Conduct the following port forwarding settings with respect to the router:
IP address on the LAN side: Camera IP address (default: 192.168.0.2)
Port number on the LAN side: Camera video port number (default: 80)
Port number on the WAN side: Optional
For communication, use TCP/IP.
MEMO: When viewing video in H.264 format over the Internet, set the communication protocol of H.264
to "HTTP". (Refer to the instruction manual contained in the supplied CD-ROM.)
8

VCC-XZN600P

Router or
ADSL modem
Internet
Continued to the
next page.