Using Av Equipment; Vcr Use - Sanyo CE28WN5-B Instruction Manual

Using AV Equipment

You can connect a VCR, S-VHS VCR, Satellite Tuner, PAY TV
Decoder or Camcorder, as this TV has three Scart terminals on the
rear panel and one pair of AV input terminals on the front panel.
Selection of AV mode
Most AV equipment will automatically switch to the AV mode
(because of the pin 8 function signal) by pressing the PLAY button
on your AV equipment. If not, press the
desired AV mode manually.
Setting of AV2 input mode
If you want to use a VCR which is equipped with the S-VHS
capability, to obtain the best performance, you should connect to the
AV2 terminal and select the S-Video mode in the AV2 mode.
SETTING
1. Press the MENU button to display the main menu. Use the
button to highlight the SETTING menu.
MENU
PICTURE
SOUND
SETTING
PRESET
TIMER
OK
2. Press the F/OK button on the remote control handset.
3. Use the or button to highlight the AV2 menu. Select
"S-VIDEO" or "VIDEO" by pressing the
SETTING
AV2
AUTO VOLUME
CHILD LOCK
ADJUST:
To return to the TV mode, press the MENU button.
Use of front AV3 terminal
This TV provides one pair of AV input terminal on the front panel. It is
very convenient for use as a game or camcorder connection.
Press the TV/ button to select the AV3 mode.
12
CONNECTION OF A
CONNECTION OF A
button to select the
TV/
EXIT : MENU
or button.
VIDEO
ON
S-VIDEO
OFF
EXIT : MENU
V EQ UIPMENT
V EQ UIPMENT
Selection of the sound track from the equipment
By pressing the A•B
track L (left), R (right) or L/R from the equipment connected to the
scart terminals or the front AV terminal.
Hello !
Selection of colour system
By pressing the
colour system mode will be changed as follows;
AUTO -> PAL -> NTSC4.43 -> NTSC3.58 ->
or
VCR / DVD controls
This remote control transmitter has been designed to be used in
conjunction with selected SANYO VCR's and DVD players. Some
SANYO VCR's and DVD players may have their own functions,
so please refer to the individual instruction booklet when using
this remote control to ensure compatibility.
Some of the keys are used for both the VCR and DVD player.
The symbols indicated with blue are for the keys to control the
DVD player. When you use the DVD player with this remote
control, first press and hold the DVD button and then press your
desired control button each time.
VCR
Power
Play
Pause
Stop
Fast/Cue
Rewind/Review
Record, press both buttons at the same time.
DVD n/a
OK n/a
n/a
button repeatedly, you can select the sound
L/R
Hello ! Bonjour!
R
L
Bonjour!
Hello ! Bonjour!
?
button repeatedly in the AV mode, the
AV1
AUTO
PAL
NTSC3.58
NTSC4.43
VCR / DVD Use
DVD
Power
Play
Pause
Stop
Next chapter selection
Previous chapter selection
DVD command mode selection
Enter
Cursor selection