Display Pwb Replacement; Funnel Replacement; Sub Pwb For Working Dispenser; Duct Door Replacement - Kenmore 795.71022.010 Service Manual

2) Hold the left and right side
of the "Cover Assembly,
dispenser" as shown in the
picture, and pull and
remove it. The cover
dispenser is attached with a
hook.
CAUTION : When replacing the dispenser cover in the
reverse order of removal, be careful that the lead wire
does not come out and the water tube is not pinched by
the dispenser cover, as shown in the picture below.

3-10 DISPLAY PWB REPLACEMENT

1) Pull up and out on the dispenser cover to remove.
2) Follow the steps in the pictures

3-11 FUNNEL REPLACEMENT

1) Pull up and out on the dispenser cover to remove.
2) Disconnect the wire harness.
3) Replace in reverse order.

3-12 SUB PWB FOR WORKING DISPENSER

1) Loosen the screw on the sub PWB.
2) Pull the sub PWB down.
3) Disconnect the wire harness and replace the sub PWB in
the reverse order of removal.

3-13 DUCT DOOR REPLACEMENT

1) Pull up and out on the dispenser cover to remove.
2) Disconnect the wire harness.
3) Remove the funnel
4) Replace in reverse order.
- 11 -