Resetting The Microprocessor - Pioneer AVIC-X1 Hardware Manual

MAN-AVIC-X1-EN HW.book Page 9 Friday, January 16, 2004 11:41 AM

Resetting the microprocessor

• Pressing the RESET button deletes the
contents of the product's memory. For
details, see section "About the Data being
Deleted" of the Operation Manual.
Pressing RESET button lets you reset the
microprocessor to its initial settings without
changing the condition memory.
The microprocessor must be reset under the
following conditions:
• Prior to using this unit for the first time after
installation.
• If the unit fails to operate properly.
• If there appear to be problems with the
operation of the system.
• When changing the combination of the
equipment.
• When adding/removing additional products
that attach to the unit.
• When the display and the Hide-away units are
re-connected.
1
Turn the ignition switch OFF.
2
Press RESET button with a pen tip or
other pointed instrument.
RESET button
If you have connected other equipment (for
example, a TV tuner) to this by cable, be sure
to reset that equipment too.
After completing connections or when you
want to erase all memorised settings or return
the unit to its initial (factory) settings, switch
your engine ON or set the ignition switch to
ACC ON before pressing RESET button.
9