Pioneer AVIC-HD1BT Hardware Manual page 24

Equaliser (3-Band Parametric Equaliser):
Low
Frequency ............. 40/80/100/160 Hz
Q Factor ................ 0.35/0.59/0.95/1.15 (+6 dB
Gain....................... ±12dB
Mid
Frequency ............. 200/500/1k/2k Hz
Q Factor ................ 0.35/0.59/0.95/1.15 (+6 dB
Gain....................... ±12dB
High
Frequency ............. 3.15k/8k/10k/12.5k Hz
Q Factor ................ 0.35/0.59/0.95/1.15 (+6 dB
Gain....................... ±12dB
Loudness contour:
Low................................ +3.5 dB (100 Hz), +3 dB (10
Mid ................................ +10 dB (100 Hz), +6.5 dB
High .............................. +11 dB (100 Hz), +11 dB
HPF:
Frequency..................... 50/80/125 Hz
Slope ............................. –12 dB/oct
Subwoofer:
Frequency..................... 50/80/125 Hz
Slope ............................. –18 dB/oct
Gain............................... ±12dB
Phase ............................ Normal/Reverse
DVD Drive
System .................................. DVD-Video, Compact disc
Usable discs......................... DVD-Video, Compact disc,
Region number .................... 2
Signal format:
Sampling frequency .... 44.1/48/96 kHz
Number of quantisation bits
................................... 16/20/24; linear
Frequency response ............ 5 Hz to 44 000 Hz (with DVD,
Signal-to-noise ratio ............ 97 dB (1 kHz) (IEC-A net-
Dynamic range .................... 95 dB (1 kHz)
Distortion.............................. 0.008 % (1 kHz)
Output level:
Video ............................. 1.0 Vp-p/75 Ω (±0.2 V)
Audio............................. 1.0 V (1 kHz, 0 dB)
Number of channels............ 2 (stereo)
MP3 decoding format.......... MPEG-1 & 2 Audio Layer 3
FM tuner
Frequency range .................. 87.5 MHz to 108.0 MHz
22
when boosted)
when boosted)
when boosted)
kHz)
(10 kHz)
(10 kHz)
(Volume: –30 dB)
audio, MP3 system
MP3
at sampling frequency 96
kHz)
work)
(CD: 96 dB (1 kHz) (IEC-A
network))
(CD: 94 dB (1 kHz))
Usable sensitivity................. 8 dBf (0.7 μV/75 Ω, mono, S/
Signal-to-noise ratio ............ 75 dB (IEC-A network)
Distortion.............................. 0.3 % (at 65 dBf, 1 kHz,
Frequency response ............ 30 Hz to 15 000 Hz (±3 dB)
Stereo separation ................ 45 dB (at 65 dBf, 1 kHz)
Selectivity ............................. 80 dB (±200 kHz)
MW
Frequency range.................. 531 kHz to 1 602 kHz (9 kHz)
Usable sensitivity................. 18 μV (S/N: 20 dB)
Signal-to-noise ratio ............ 65 dB (IEC-A network)
LW
Frequency range.................. 153 kHz to 281 kHz
Usable sensitivity................. 30 μV (S/N: 20 dB)
Signal-to-noise ratio ............ 65 dB (IEC-A network)
Note:
Specifications and design are subject to possible
modifications without notice due to improve-
ments.
N: 30 dB)
stereo)
0.1 % (at 65 dBf, 1 kHz,
mono)