Table of Contents
Advertisement
Section
03
Operating this unit
# You can display the menu by pressing the
MENU or TOP MENU while a disc is playing.
Pressing either of these buttons again lets you
start playback from the location selected from the
menu. For details, refer to the instructions pro-
vided with the disc.
# The way to display the menu differs depending
on the disc.
3
To perform fast forward or reverse,
press and hold m or n.
# If you continue pressing m or n for five
seconds, the icon m or n is highlighted.
When this happens, fast reverse/fast forward con-
tinues even if you release m or n. To resume
playback at a desired point, press f.
# Fast forward/fast reverse may not be possible
at certain locations on some discs. If this hap-
pens, normal playback automatically resumes.
# There is no sound on fast forward or reverse.
4
To skip back or forward to another
chapter, press o or p.
Pressing p skips to the start of the next
chapter. Pressing o once skips to the start
of the current chapter. Pressing again will skip
to the previous chapter.
Chapter numbers are displayed for eight sec-
onds.
5
To stop playback, press g.
# When you stop DVD playback by pressing g,
that location on the disc is memorized enabling
playback from that point when you play the disc
again.
# To resume playback, press f.
# If the remote control is set to DVH, g does
not operate.
Specifying title
To perform this function, set the remote con-
trol to DVD mode.
20
En
! You cannot operate this function by using
NUMBER when the remote control is set to
DVH mode.
% Press NUMBER corresponding to a de-
sired title.
Title number is displayed for eight seconds
and playback starts from the selected title.
! To select 3, press 3.
! To select 10, press 10 and 0 in that order.
! To select 23, press 10, 10 and 3 in that
order.
Selecting a chapter directly
When using the remote control, you can select
a chapter directly by entering the desired
chapter number.
! To perform this function, set the remote
control to DVH mode.
1
Press DIRECT.
Chapter number input display appears.
2
Press NUMBER buttons to enter the de-
sired chapter number.
! To select 3, press 3.
! To select 10, press 1 and 0 in order.
# You can cancel the input number by pressing
CLEAR.
3
Press DIRECT.
The chapter of entered number will play.
Note
After entering the number input mode, if you do
not perform an operation within about eight sec-
onds, the mode is automatically canceled.
Pausing DVD video playback
Pause lets you temporarily stop disc playback.
Advertisement
Table of Contents
