Pioneer FH-P80BT Installation Manual page 5

Cd rds receiver
Hide thumbs Also See for FH-P80BT:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Connecting the units
This product
Fuse (10 A)
Speaker leads
White:
Front left
White/black:
Front left
Gray:
Front right
Gray/black:
Front right
Green:
Rear left
Green/black:
Rear left
Violet:
Rear right
Violet/black:
Rear right
14 cm
AUX jack (3.5 ø)
Use a stereo mini
plug cable to connect
with auxiliary device.
Wired remote input
Hard-wired remote control adaptor can
be connected (sold separately).
Blue/white
Connect to system control terminal of the
power amp (max. 300 mA 12 V DC).
Blue/white (7*)
Connect to auto-antenna relay control
terminal (max. 300 mA 12 V DC).
Blue/white (6*)
The pin position of the ISO connector will differ
depends on the type of vehicle. Connect 6* and
7* when Pin 5 is an antenna control type. In
another type of vehicle, never connect 6* and 7*.
Notes
• Change the initial setting of this unit (refer to the
operation manual). The subwoofer output of this
unit is monaural.
• When using a subwoofer of 70 W (2 Ω), be sure to
connect with Violet and Violet/black leads of this
unit. Do not connect anything with Green and
Green/black leads.
or subwoofer
or subwoofer
or subwoofer
or subwoofer
Microphone input
4 m
1.5 m
USB cable
Connect to separately sold USB device.
Microphone
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents