Initial Settings; Adjusting Initial Settings; Selecting The Language; Setting The Date - Pioneer DEH-P8100BT Operation Manual

Initial Settings

Adjusting initial settings

1 1 1
Using the initial settings, you can customize
various system settings to achieve optimal per-
formance from this unit.
1 Function display
! Shows the function status.
1 Press SRC/OFF and hold until the unit
turns off.
2 Press MULTI-CONTROL and hold until
the initial setting menu appears in the dis-
play.
3 Turn MULTI-CONTROL to select one of
the initial settings.
Turn MULTI-CONTROL to switch between the
functions in the following order.
Language select (language selection)—
Calendar (calendar)—Clock (clock)—
Off clock (off clock)—FM step (FM tuning
step)—Auto PI (auto PI seek)—Warning tone
(warning tone)—AUX1 (auxiliary input 1)—
AUX2 (auxiliary input 2)—List guidance
(voice guidance setting)—Dimmer (dimmer)
—Brightness (brightness)—S/W control (rear
output and subwoofer controller)—
Demonstration (feature demo)—
Reverse mode (reverse mode)—Ever-scroll
(ever scroll)—BT AUDIO (BT audio setting)—
BT Memory clear (clearing Bluetooth mem-
ory)—Software update (software update)
Use the following instructions to operate each
particular setting.
# To cancel initial settings, press
BAND/ESC/CANCEL.

Selecting the language

For your convenience, this unit equips multi-
ple language guidance. You can select the lan-
guage best suited to your first language.
1 Display the initial setting menu.
Refer to Adjusting initial settings on this page.
2 Use MULTI-CONTROL to select
Language select in the initial setting menu.
3 Push MULTI-CONTROL left or right to
select the language.
English—Français—Italiano—Español—
Deutsch—Nederlands—РУССКИЙ
4 Press MULTI-CONTROL to determine
the selection.
# Display guidance and voice guidance are set
to the same language simultaneously.
# If the language is set to РУССКИЙ, voice gui-
dance and TTS (text to speech) cannot be
performed.

Setting the date

The calendar display adjusted in this mode ap-
pears when the telephone source is selected
or sources and the feature demo are off.
1 Display the initial setting menu.
Refer to Adjusting initial settings on this page.
2 Use MULTI-CONTROL to select Calendar
in the initial setting menu.
Calendar appears in the display.
3 Push MULTI-CONTROL left or right to
select the segment of the calendar display
you wish to set.
Pushing MULTI-CONTROL left or right will se-
lect one segment of the calendar display:
Day—Month—Year
As you select segments of the calendar dis-
play the segment selected will blink.
Section
11
49
En