SERVICE WORK ON THE CHASSIS
Removing the fork protector
11.9
Installing the fork protector
11.10
Removing the lower triple clamp
11.11
x
–
Remove the fork legs.
–
Remove screws
–
Remove the screws on the right fork leg. Lift off the fork protector.
B00306-10
x
–
Position the fork protection on the left fork leg. Mount and tighten screws
Guideline
Remaining screws, chassis
–
Position the fork protection on the right fork leg. Mount and tighten the screws.
Guideline
Remaining screws, chassis
–
Install the fork legs.
B00306-10
x
–
Remove the fork legs.
–
Remove the start number plate. (
–
Remove the front fender. (
–
Remove the handlebar cushion.
–
Remove screw
–
Remove screw
–
Take off the upper triple clamp with the handlebar and set it aside.
Info
Protect the motorcycle and its attachments against damage by covering
them.
Do not bend the cables and lines.
800218-10
–
Remove O-ring
–
Take out the lower triple clamp with the steering stem.
–
Take out the upper steering head bearing.
B00310-10
(
p. 39)
x
on the left fork leg. Lift off the fork protector.
M6
M6
(
p. 39)
x
(
p. 39)
x
p. 43)
p. 44)
.
.
. Remove protective ring
10 Nm (7.4 lbf ft)
10 Nm (7.4 lbf ft)
.
40
.