Unregister Handsets; Restore Default Settings - Philips M888 Extended User Documentation

Auto registration
Extra handsets of the same model can be auto-
registered. Place the unregistered handset on
the base station.
» The handset detects the base station
and registers automatically.
» Registration is complete in less
than two minutes. The base station
automatically assigns a handset number
to the handset.
Manual registration/Pairing
If auto registration fails or if you register a
handset of a different model, register your
handset manually to the base station.
1
Select [Menu].
2
Press / to select
to confirm.
3
Select [Register], then press [OK] to
confirm.
4
Press and hold
5 seconds.
5
Enter the system PIN/passcode. Press
[Clear] to make corrections.
6
Press [OK] to confirm the PIN/passcode.
» Registration is complete in less than 2
minutes.
Note
•
If the PIN/passcode is incorrect or no base is found
within a certain period, your handset displays a
notification message. Repeat the above procedure if
registration fails.
•
The preset PIN/passcode is 0000. No change can be
made on it.
, then press [OK]
on the base station for

Unregister handsets

1
If two handsets share the same base
station, you can unregister a handset with
another handset.
2
Select [Menu].
3
Press / to select
to confirm.
4
Select [Unregister], then press [OK] to
confirm.
5
Select the handset to be unregistered.
6
Press [OK] to confirm.
» The handset is unregistered.

Restore default settings

You can reset your phone settings to the
original factory settings.
1
Select [Menu].
2
Press / to select
to confirm.
3
Select [Reset], then press [OK] to confirm.
» A confirmation request is displayed on
the handset.
4
Press [OK] to confirm.
» All settings are reset.
, then press [OK]
, then press [OK]
EN
41