Table of Contents
Advertisement
15 Services
The phone supports a number of features that
help you handle and manage the calls.
Make sure that all the handsets registered to
the base station are Philips D60 models in
order to have this feature functioning properly.
Auto conference
To join an external call with another handset,
press
.
Note
•
This feature is available only for multi-handset versions.
Activate/Deactivate auto conference
1
Select [Menu] >
press [OK] to confirm.
2
Select [Auto]/[Off], then press [OK] to
confirm.
» The setting is saved.
Call barring
You can create four sets of numbers with four
digits at maximum for each set of numbers.
When you make a call that starts with one of
these four sets of numbers, the outgoing call is
then barred.
Select the barring mode
1
Select [Menu] >
> [Barring mode] then press [OK] to
confirm.
2
Enter the PIN/passcode. The default PIN/
passcode is 0000.
28
EN
> [Conference], then
> [Call barring]
3
Select [On]/[Off], then press [OK] to
confirm.
» The setting is saved.
Add new number to the barred list
1
Select [Menu] >
[Barring number], then press [OK] to
confirm.
2
Enter the PIN/passcode. The default PIN
is 0000.
3
Select a number from the list, then press
[OK] to confirm.
4
Edit the number, then press [OK] to
confirm.
» The setting is saved.
Note
•
The number in the barred list can still be sent as an
external line for a baby call (see 'Send to an external
line' on page 27).
Change the PIN/passcode
1
Select [Menu] >
[Change PIN], then press [OK] to confirm.
2
Enter the old PIN/passcode, then press
[OK] to confirm.
3
Enter the new PIN/passcode, then press
[OK] to confirm.
4
Enter the new PIN/passcode again, then
press [Save] to confirm.
» The setting is saved.
Note
•
If you forget the PIN/passcode, you have to reset your
phone (see 'Restore default settings' on page 33).
> [Call barring] >
> [Call barring] >
Advertisement
Table of Contents
