Setting The Timer - Panasonic CS-KS12NB41 & CZ-18BT1U + CU-KS12NK1A Technical & Service Manual

SETTING THE TIMER

1. How to set the present time
(Example) To set to 9:10 pm.
Operation
1.
Press the SET button three
times.
2.
• Press the HH button until
PM 9 is displayed.
• Press the MM button until
10 is displayed.
2. How to set the OFF time
(Example) To stop the air conditioner at 11:30 pm.
OFF TIME
Operation
1.
Press the SET button twice.
2.
• Press the HH button until
PM 11 is displayed.
• Press the MM button until
30 is displayed.
3.
Press the TIMER SELECT
button twice to set OFF time.
To cancel the setting, press the TIMER SELECT button twice.
Indication
The time indication alone
flashes.
The display will flash for 10 sec.
and automatically stop flashing
except for the " : " symbol.
Present time
Indication
The timer indication alone
flashes and the previous set-
time is only displayed.
The display will change
automatically back to show the
present time after about 10 sec.
The present time and are
displayed.
3. How to set the ON time
(Example) To start operation at 7:10 am.
ON TIME
Operation
1.
Press the SET button once.
2.
• Press the HH button until
AM 7 is displayed.
• Press the MM button until
10 is displayed.
3.
Press the TIMER SELECT
button once to set ON time.
To cancel the setting, press the TIMER SELECT button three times.
4. How to set daily ON/OFF repeat timer
(Example) To start operation at 7:10 am. and stop the air conditioner
at 11:30 pm.
Present time
ON TIME
9:10 pm. 7:10 am.
Present time
ON
Operation
Set the timer ON/OFF times as
shown in 2 and 3.
To cancel the setting, press the TIMER SELECT button once.
NOTE
You can check the timer ON/OFF times after you have set them by
pressing the SET button.
5. Backup function
Even if the main power supply to the unit is turned off, the remote
controller will store the previous settings in its internal memory for up
to 8 hours. If the power is not turned back on within 8 hours, the
previous settings will be lost. In this case, the mode settings must be
reset by the user.
Present time
Indication
The timer indication alone
flashes and the previous set-
time is only displayed.
The display will change
automatically back to show the
present time after about 10 sec.
The present time and are
displayed.
OFF TIME
Programmed
daily ON / OFF
11:30 pm.
OFF
Indication
The present time PM 9:10 and
are displayed.
9