Call Settings; Text And Messages; Write Text; Text Modes - Nokia 6600 slide User Manual

Call settings

Select Menu Settings
>
the following:
Call divert — to forward your incoming
calls (network service). You may not be
able to forward your calls if some call
barring functions are active.
Anykey answer — to answer an
incoming call by briefly pressing any key,
except the power key, the left and right
selection keys, or the end key
Automatic redial — to automatically
redial the number if a call fails. The phone
tries to call the number 10 times.
Video-voice redial — the phone
automatically repeats a voice call to the
same number to which a video call has
failed
Voice clarity — to enhance speech
intelligibility, especially in noisy
environments
Speed dialling — to dial the names and
phone numbers assigned to the number
keys (2 to 9) by pressing and holding the
corresponding number key
Call waiting — to have the network
notify you of an incoming call while you
have a call in progress (network service)
Summary after call — to briefly display
the approximate duration after each call
Send my caller ID — to show your phone
number to the person you are calling
(network service). To use the setting
agreed upon with your service provider,
select Set by network.
Slide call handling — to set the phone
to answer calls when you open the slide
and to end calls when you close the slide
Outgoing call line — to select the phone
line for making calls, if your SIM card
supports multiple phone lines (network
service)
Call and from
>
Video sharing — to define video sharing
settings

Text and messages

Write text, and create messages, e-mail,
and notes.

Write text

Text modes

To enter text (for example, when writing
messages) you can use traditional or
predictive text input.
When you write text, press and hold
Options to switch between traditional
text input, indicated by
predictive text input, indicated by
Not all languages are supported by
predictive text input.
The character cases are indicated by
, and .
To change the character case, press #. To
change from the letter to number mode,
indicated by
select Number mode. To change from the
number to the letter mode, press and hold
#.
To set the writing language, select
Options Writing
>

Traditional text input

Press a number key, 2-9, repeatedly until
the desired character appears. The
available characters depend on the
selected writing language.
If the next letter you want is located on
the same key as the present one, wait until
the cursor appears, and enter the letter.
To access the most common punctuation
marks and special characters, press 1
Stay in touch
, and
, press and hold #, and
language.
19
.
,