Phone Settings; Security Settings - Nokia 6600 slide User Manual

Select Menu Settings
>
Sensor settings
function and vibration feedback.
Mute calls or alarms
Double-tap the phone.
Reject a call or snooze an alarm after
muting it
Double-tap the phone again.
Display the clock
Double-tap the phone.
If you have missed calls or received new
messages, you must view them before you
can see the clock.

Phone settings

Select Menu Settings
>
from the following:
Language settings — to set the display
language of your phone, select
language. . To set a language for the
voice commands, select
lang..
Memory status — to check the memory
consumption
Automatic keyguard — to lock the
keypad automatically after a preset time
when the phone is in the standby mode
and no function has been used.
Security keyguard — to ask for the
security code when you unlock the
keyguard
Sensor settings — to activate and adjust
the tapping function
Voice recognition —
commands", p. 13.
Flight query — to be asked whether to
use the flight mode when you switch the
phone on. With the flight mode, all radio
connections are switched off.
Phone
>
to activate the tap
Phone
>
Phone
Recognition
See "Voice
Phone updates — to receive software
>
updates from your service provider
(network service). This option may not be
available, depending on your phone.
"Software updates over the air", p. 35.
Network mode — to use both the UMTS
and the GSM network. You cannot access
this option during an active call.
Operator selection — to set a cellular
network available in your area
Help text activation — to select whether
the phone shows help texts
Start-up tone — to play a tone when you
switch the phone on
Confirm SIM actions —
services", p. 16.

Security settings

When security features that restrict calls
and
are in use (such as call barring, closed user
group, and fixed dialling), calls may be
possible to the official emergency number
programmed into your device.
Select Menu
from the following:
PIN code request or UPIN code
request — to request for your PIN or UPIN
code every time the phone is switched on.
Some SIM cards do not allow the code
request to be turned off.
PIN2 code request — to select whether
the PIN2 code is required when using a
specific phone feature which is protected
by the PIN2 code. Some SIM cards do not
allow the code request to be turned off.
Call barring service — to restrict
incoming calls to and outgoing calls from
your phone (network service). A barring
password is required.
Fixed dialling — to restrict your
outgoing calls to selected phone numbers
if supported by your SIM card. When the
fixed dialling is on, GPRS connections are
Make it your phone
See "SIM
Settings Security
> >
11
See
and