Tripp Lite SmartPro SMARTINT2200VS Specification

Model #: SMARTINT2200VS
SmartPro 2.2kVA Line Interactive UPS, SNMPWEBCARD option, Tower, USB, Serial, EPO, 230V
Description
Tripp Lite's SMARTINT2200VS intelligent, line interactive tower uninterruptible power supply (UPS) prevents data loss, downtime and equipment
damage due to power outages, voltage fluctuations and transient surges. Large internal batteries offer 19 minutes half load runtime and 7 minutes at
full load. Maintains regulated 230V nominal output without using battery power during brownouts and overvoltages from 151 to 282V. 2200VA power
handling capability offers compatibility with a variety of networking, telecom and other sensitive electronic applications. Includes a total of 9 outlets
with 3 load banks (2 outlets each) that are individually switchable via software interface to reboot select equipment on demand or shed less
significant loads to extend battery runtime for more critical equipment. Supports simultaneous remote monitoring of UPS and site power conditions
via built-in USB and DB9 monitoring ports. Includes PowerAlert UPS monitoring and unattended shutdown software with complete cabling. Built-in
accessory slot supports SNMP with optional SNMPWEBCARD adapter. Emergency Power Off (EPO) interface offers option for instantaneous
power-off of UPS and connected equipment in the case of fire or emergency. Multi-function audible alarms and set of 5 front panel LEDs offer
at-a-glance notification of UPS and line power status. Network-grade AC surge suppression protects equipment from damage and performance
problems resulting from transient surges and line noise. Attractive gray color scheme.
Package Includes
SMARTINT2200VS UPS System
PowerAlert software with USB and DB9 cables
Cable for Emergency Power Off interface
Instruction manual with warranty information
C13 to C14 power cables (3)
Features
SMARTINT2200VS line interactive UPS offers protection from blackouts, brownouts, overvoltages and surges
2200VA / 1600 watt capacity
Internal batteries support a half load of 1100VA for 19 minutes and a full load of 2200VA for 7 minutes
Maintains regulated 230V nominal output during brownouts and overvoltages from 151 to 282V
Includes 9 UPS supported outlets with 3 individually controllable load banks that can be powered off and back on again via software
interface
IEC320-C20 input connection accepts a variety of detachable cordsets to match country or site-specific wall receptacles
PowerAlert UPS monitoring and unattended shutdown software included
Offers simultaneous monitoring by up to 4 directly-connected devices through included USB and DB9 interface ports, or the monitoring by
any number of additional servers over IP with included PowerAlert monitoring software.
Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power restored, AC line voltage,
DC battery voltage and remaining battery capacity
Emergency Power Off (EPO) interface with cable
Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for immediate reboot of
connected devices
Highlights
2.2kVA / 2200VA line interactive tower UPS system
230V nominal output during brownouts to 151 and overvoltages to 282V
Front panel status LEDs with load and battery capacity level display
USB, RS232, EPO and optional SNMP/Web interface; 3 switched load banks
C20 inlet; 8 C13 & 1 C19 outlets; 2 C13 to C14 cables included
Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail: saleshelp@tripplite.com