GE Profile PT925DN Dimensions And Installation Information

Cutout width
PT925DN
28-1/2'' MIN.
28-5/8'' MAX.
GE Profile 30" Built-In Single/Double Convection Wall Oven
™
Dimensions and Installation Information (in inches)
23-1/2'' MIN.
Cutout depth
KW Rating
240V
3.9
A
208V 2.9
B
Breaker Size
240V 20 Amps
27-1/4'' MIN.
Conduit
208V 20 Amps
27-5/16'' MAX.
(72"
long)
Cutout height
Most 30" Wall Cabinets can be used with this unit.
Note: These ovens are not approved for
stackable installations. Cabinets installed
adjacent to wall ovens must have an adhesion
Recommended
spec of at least a 194°F temperature rating.
cutout location
Door handle protrudes 3" from door face. Cabinets
32-1/2"
and drawers on adjacent 45° and 90° walls should
from floor
be placed to avoid interference with the handle.
Electric wall ovens are not approved for
installation with a plug and receptacle. They
30
must be hard wired in accordance with
installation instructions.
Installation Information: Before installing, consult
installation instructions packed with product for
current dimensional data.
Side-by-side installations require at least 2"
between cutouts.
For answers to your Monogram,
®
GE appliance questions, visit our website at
®
ge.com or call GE Answer Center
®
800.626.2000.
5
Junction
box
location
22'' MIN.
Suitable
bracing
to support
runners
GE Profile or
™
service,
C L
2 x 4 or
equivalent
runners
Allow 11/16"
(1.75 cm) for
ALLOW 11/16" FOR
overlap of oven
OVERLAP OF THE
over side edges
OVEN OVER SIDE
of cutout
EDGES OF CUTOUT
21-5/8"
over centerline
of cabinet
(must support 275 lbs.)
15"
(38.1 cm)
21"
Allow a minimum
ALLOW A MINIMUM
of 15" (38.1 cm) for
F 21" FOR CLEARANCE
clearance to adjacent ADJACENT CORNERS,
R AWERS, WALLS ETC.
corners, drawers,
N THE DOOR IS OPENED.
walls, etc. when
door is open
9 1/2"
Cutout
(12.7 cm)
Width
Max.
CUTOUT
5"
28 1/2"
WIDTH
28 1/2" MIN.
(72.4 cm)
28 5/8" MAX.
Min.
28 5/8"
(72.7 cm)
Max.
Opening
Cutout
Between
Height
THE OPENING
Inside Walls
27 1/4"
BETWEEN INSIDE
CUTOUT
Must Be
(69.2 cm) Min.
WALLS MUST
HEIGHT
At Least
BE AT LEAST 27 5/16"
27 1/4" MIN.
28 1/2"WIDE
(69.4 cm) Max.
28 1/2"
27 5/16" MAX.
(72.4 cm)
Wide
Recommended
RECOMMENDED
Allow 1" (2.5 cm) cutout
CUTOUT
minimum for location from LOCATION
ALLOW 1" FOR
32 1/2"
overlap of oven OVERLAP floor 26 1/2"
FROM THE
ON OVEN TOP
top and 1 1/4" (67.3 cm) max
FLOOR
AND BOTTOM
(3.2 cm) overlap
OF CUTOUT
of oven bottom
of cutout
Cabinet
CABINET
Width
WIDTH
30"
30"
(76.2 cm)
Listed by
Underwriters
Laboratories
Specification Revised 4/09
Junction Box
Location
(junction box
may be
located in
adjacent
JUNCTION B
LOCATIO N
cabinet)
22" (55.9 cm)
22" TO
Min. to
BOTTOM OF
Bottom of
JUNCTION BOX
Junction Box
220244