Dial-Up Networking Via Usb - Sharp STX-2 User Manual

6.
Enter the "Pass Code" for the headset, located in the headset User's
Manual (if Bluetooth Headset support 2.1 version, Tap Yes on the
screen with the prompt "Bluetooth Headset name Pair?").
7.
Tap "Yes" or "No" on the screen with prompt "Authorize device?".

DIAL-UP NETWORkING VIA USB

Your device can be used as a network device for Internet sharing. You
can share files with a computer or use an Internet connection, etc.
1.
Before you connect the device, set your device to Data Service
Mode. To do this, tap the
Settings icon
then select
Service > Save .
2.
Connect your SHARP FX to your PC with a USB cable.
You will need a USB Driver to connect your PC. The Dial-Up Networking
Note
via USB feature must first be disabled before initiating a USB
connection with the phone. Prior to connecting the USB cable to the
phone, install the latest version of the USB Driver.
3.
Execute the Dial up application you created.
4.
Click "Properties" for modem setting.
5.
"PHD HS-USB Modem 9002" will appear. Check it as modem.
6.
Enter *99#.
7.
Click "OK".
8.
Click "Dial" to connect. "User name" and "Password" are not used
for a UMTS connection.
PC CONNECTIVITY
Menu icon , Drag toward the left
Phone USB Connection Mode
>
, tap
Data
>
145