Related Manuals for Sharp SH80F
Summary of Contents for Sharp SH80F
- Page 1 SH80F Instruction Manual (extract)
-
Page 2: Declaration Of Conformity
The WLAN can be operated in the EU without restriction indoors, but cannot be operated outdoors in France. Hereby, Sharp Telecommunications of Europe Ltd,declares that this SH80F is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. - Page 3 Caution Use only the battery packs (SH30) ,adapters (including micro USB cable) (SH10) and headset (SH40) specified by SHARP for use with the terminal. May cause fires, burns, bodily injury or electric shock. Do not point the illuminated light directly at someone’s eyes. Especially when you shoot still pictures or moving pictures of young children, keep 1 m or more distance from them.
- Page 4 Do not throw the battery pack into a fire. The battery pack may catch fire, explode, overheat or leak. Do not dispose of used battery packs in ordinary garbage. May cause fires or damage to the environment. Place tape over the terminals to insulate unnecessary battery packs, and take them to retailer or institution that handles used batteries in your area.
- Page 5 2) Open the external connector terminal cover of the terminal and insert the microUSB plug of the micro USB cable horizontally into the external connector terminal. Insert the microUSB plug horizontally with the character side turned down. SH80F SH10 3) When inserting the AC adapter power plug into an outlet, charging lamp...
- Page 6 Do not forcibly insert or remove. May cause damage to the external connector terminal, the microUSB plug and the connector. Pull the adapter out of the outlet if it will not be used for a long time. Do not forcibly pull the external connector terminal cover. May damage the cover. Do not place objects near the terminal when charging.
- Page 7 Turning power ON/OFF Turning power ON [ ] (for at least 2 seconds) Turning power OFF [ ] (for at least 1 second) [Power off] [OK] Sleep mode The screen is off and the sleep mode is activated when [ ] is pressed or the terminal is not in use for a set length of time.
- Page 8 Basic operation Operation of touch panel You can operate by touching the touch panel (display) directly with your finger. Operations differ depending on the function and screen in use. Operations differ depending on the function and screen in use. The touch panel is designed to be lightly touched with your finger. Do not forcefully press with your finger or press with a pointed object (fingernail, ballpoint pen, pin, etc.).
- Page 9 1) Keep your finger on the touch panel and slide it Quickly slide Quickly slide to the left/right in the home screen etc. to switch pages. 1) Quickly slide your finger and put it off Put a distance between two fingers apart/closer Put a distance between two fingers apart/closer while displaying an image etc.
- Page 10 Making a call 1) In the home screen, [ ] [Phone] 2) Enter a phone number 3) [ ] 4) [ ] to end the call Receiving a call 1) When a call is received, the ring tone sounds and the incoming lamp flashes 2) Keep touching [ ] and slide to the right To place a call on hold: Keep touching [ ] and slide to the left...
- Page 11 Wi-Fi settings Wi-Fi allows you to access the Internet using wireless LAN function. To use Wi-Fi, you need to connect to the wireless LAN access point (Wireless LAN base unit). Packet communication is also available while Wi-Fi function is enabled. Wi-Fi connection is prioritized while Wi-Fi connection is set, but the connection will be automatically switched to that of packet communication once Wi-Fi connection is terminated.
- Page 12 [Easy Wi-Fi registration] The registration process takes a few minutes. After completion of the registration of the access point, check that the proper connection to the access point is acquired. [Add Wi-Fi network] This function supports WEP, WPA/WPA2-PSK,802.1xEAP as for the security setting. Disconnecting 1) In the home screen, [ ] [Settings]...
- Page 13 Bluetooth settings Enable Bluetooth function in advance To register/connect a Bluetooth device, the Bluetooth passkey may need to be entered. Before starting the registration, decide the 1- to 16-digit number. Enter the same number on the terminal and the other party’s Bluetooth device. 1) In the home screen, [ [Settings] [Wireless &...
- Page 14 Setting is disabled automatically when a certain period of time passed after enabling. [Scan for devices] For details on the operations of the other party’s Bluetooth device, refer to the manuals of the Bluetooth device to be used. When receiving registration request from Bluetooth device or connection request from unregistered Bluetooth device 1) Registration request/Connection request from Bluetooth device 2) Touch the status bar/select registration request connection request...
- Page 15 European RF Exposure Information Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. These guidelines were developed by the independent scientific organization ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health.
- Page 16 communications. However, there is no guarantee that interference will not occur in a particular installation; if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1.
- Page 17 Telecommunications & Internet Association (CTIA) Website at http://www.ctia.org/. Intellectual Property Right The Bluetooth word mark and logos are owned by the Bluetooth SIG, INC. and any use of such marks by SHARP. is under license. Other trademarks and trade names are those of their respective owners.