Listen To The Radio; Tune To A Radio Station; Program Radio Stations; Select A Preset Radio Station - Philips DTM5096 User Manual

6 Listen to the
radio

Tune to a radio station

Tip
•
For optimal FM reception, fully extend and adjust the
position of the FM antenna.
1
Press TUNER/RDS on the remote control
or tap SRC repeatedly on the main unit to
select the tuner source.
2
Press and hold
seconds.
» [SEARCH] (search) is displayed.
» The radio tunes to a station with
strong reception automatically.
3
Repeat step 2 to tune to more stations.
• To tune to a weak station, press
repeatedly until you find optimal
reception.

Program radio stations

Tip
•
You can program a maximum of 20 preset radio
stations.
Program radio stations automatically
In tuner mode, press and hold PROG/CLOCK
SET for more than two seconds to activate
automatic program mode.
» [AUTO SRCH](auto search) is
displayed.
16 EN
/ for more than two
» All available stations are programmed
in the order of waveband reception
strength.
» The first programmed radio station is
broadcast automatically.
Program radio stations manually
1
Tune to a radio station.
2
Press PROG/CLOCK SET to activate
program mode.
» [PROG] (program) blinks on the
display.
3
Press
to this radio station, and then press PROG/
CLOCK SET to confirm.
» The preset number and the frequency
of the preset station are displayed.
4
Repeat the above steps to program other
stations.
Note
/
•
To overwrite a programmed station, store another
station in its place.

Select a preset radio station

In tuner mode, press
number.
• You can also press the numeric key to
select a preset number directly.

Display play information

Radio Data System (RDS) is a service
that allows FM stations to show additional
information.
In tuner mode, press TUNER/RDS repeatedly
to show RDS information.
/ to allocate a number (1 to 20)
/ to select a preset