Play From Usb - Philips DTM5096 User Manual

Load the iPod/iPhone/iPad
Insert the iPod/iPhone/iPad in the dock.
Listen to the iPod/iPhone/iPad
Note
•
Make sure that your iPod/iPhone/iPad has been loaded
securely.
1
Press DOCK on the remote control or
tap SRC repeatedly on the main unit to
select DOCK source.
2
Play audio on your iPod/iPhone/iPad.
» The audio in connected iPod/iPhone/
iPad streams from this docking system
automatically. If not, press
To navigate the menu: press MENU/
•
, and press
and then press OK to confirm.
Charge the iPod/iPhone/iPad
When the unit is connected to power, the
docked iPod/iPhone/iPad begins to charge
automatically.
12 EN
.
/ / / to select,
Remove the iPod/iPhone/iPad
Pull the iPod/iPhone/iPad out of the dock.

Play from USB

Note
•
Ensure that the USB device contains playable audio
content.
1
Press MP3 LINK/USB repeatedly on the
remote control or tap SRC repeatedly on
the main unit to select the USB source.
2
Insert the USB device into the
socket on the back of the unit.
» The file starts playing automatically. If
not, press
(USB)
.