For Mac Users Using Scanpotter; Scanning Photos - Microtek ScanMaker i2400 Supplement Manual

For MAC Users Using ScanPotter

Scanning Photos

1. Raise the scanner lid, and place the photo to be
scanned face down on the scanner glass surface.
Position the top end of the photo towards the right
of the scanner, and then lower the scanner lid on
the scanner glass surface.
Note: For the automatic cropping feature to work
correctly during the preview scan of your photo, make sure the
scanner lid is completely flat and closed over the scan bed before you launch
ScanWizard EZ.
2. Launch ScanPotter either as a stand-alone by clicking on the program icon, or by
selecting it from the application folder in your Mac OS X system.
3. Choose Reflective from the Scan Source options menu for scanning photos.
4. Specify your scanning requirements in the Scanner Settings column.
a) Select the appropriate image type (e.g., RGB Color) in the Color Type as your
image output type.
- Select Color to scan the image in color.
- Select Grayscale to scan the image in grayscale.
- Select Black & White to scan the image in black-and-white.
b) Select a desired resolution in the Resolution for your output image.
c) Select Automatic Detection or a desired dimension in the Scan Frame as your
preview image size.
5. Click the Preview button to perform a preliminary scan of the image in the Preview
window.
6. If necessary, resize the scan frame (floating dotted rectangle) around the image by
dragging on the square spots on the edge or on the corner of the scan frame to
determine the final size of the actual scan.
7. If necessary, specify file settings for your output image files, using the options
offered in the File Saving Settings column.
8. If necessary, click the Image Settings button to switch to a window in which you
can select a preset image effect to the image directly or adjust image quality
manually by using the additional image correction tools.
9. Click the Scan button to start scanning.
ScanMaker i2400 Supplement 11