Create Schedules - TRENDnet AC750 User Manual

TRENDnet User's Guide
• Sytem Time: Displays the current device time and date information.
• Enable Daylight Saving: Check the option to configure the DST settings. Set the
annual range when daylight saving is activated.
• Enable NTP Server: Check to enable NTP server. If option is not selected you will
need to manually set your time.
• NTP Server: Select the NTP server to use on the pull down menu.
• Time Zone: Select from the pull down menu your time zone.
Note: NTP servers are used for computers and other network devices to synchronize
time across an entire network.
• NTP synchronization: Enter the time duration in minutes of when the router will
synchronize with the NTP server.
• Manually set time: This option is available when Enable NTP Server option is not
enabled.
Note: Time is specified in 24-hour format.

Create schedules

Advance > Setup> Schedule
For additional security control, your router allows you to create schedules to specify a
time period when a feature on your router should be activated and deactivated. Before
you use the scheduling feature on your router, ensure that your router system time is
configured correctly.
© Copyright 2013 TRENDnet. All Rights Reserved.
Note: You can apply a predefined schedule to the following features:
• Virtual Server
• Access Control (Domain/URL Filters & IP/Protocol LAN Client Filters)
• Special Applications
• Gaming
1. Log into your router management page (see
on page 15).
2. Click on the Advanced tab.
3. Click on Setup section and click Schedule.
3. Review the Schedule settings. Click Apply to save settings.
TEW-810DR
"Access your router management page"
34